Description
This apparatus is used to measure Sulfur Dioxide using the traditional aspiration/oxidation method.
Apparatus Module 4S715
| 1 | Adaptor, condenser to pear flask, B24 | 2A011 |
| 1 | Adaptor, pear flask to condenser, S13 | 2A012 |
| 1 | Adaptor, pear flask to vacuum, B14 | 2A013 |
| 1 | Bubbler, flat bottom flask,B14 | 2B250 |
| 1 | Bubbler, pear flask, B14 | 2B260 |
| 1 | Clamp, B24, conical joint, plastic | 2C020 |
| 1 | Clamp, S13, ball joint, stainless steel | 2C010 |
| 1 | Condenser, Inland Revenue, 1m coil, B24, with tubing | 2C210 |
| 1 | Flask, pear, flat base, two necks, 50mL | 2F410 |
| 1 | Flask, round, flat bottom, two necks, 100mL | 2F430 |
Accessories Module 4S720
| 1 | Burner, Bunsen LPG | 2B500 |
| 2 | Clamp, bosshead | 2C050 |
| 2 | Clamp, 4 prong, plastic coated | 2C085 |
| 1 | Dispenser, Kipps, 10mL, B24 | 2D010 |
| 1 | Flask, conical, 250 mL, B24 top | 2F122 |
| 1 | Flowmeter, bubble, 100mL, with tubing | 2F650 |
| 1 | Manometer, water, with tubing | 2M010 |
| 1 | Pipette, volumetric, Class B, 20mL | 2P320 |
| 1 | Pump, vacuum, electric (Valve included) | 2P610 |
| 2 | Stand, retort, 600mm | 2S305 |
| 1 | Clamp, burette, double | 2C070 |
Reagents Module 4S725
| 1 | Hydrogen peroxide, 30%, 500mL | 1H505 |
| 1 | Indicator, Mixed, for SO2, 125mL | 1M125 |
| 1 | Phosphoric acid, 25%, (orthophosphoric acid) 500mL | 1P050 |
| 1 | Sodium hydroxide, 0.100M, 1000mL | 1S510 |
Titration Module 4T830
| 1 | Beaker, plastic, 100mL | 2B131 |
| 1 | Beaker, plastic, 250mL | 2B132 |
| 1 | Bottle, wash, distilled water, 500mL | 2B196 |
| 1 | Burette, Dr. Schilling, 25mL | 2B425 |
| 1 | Water, distilled | 1W002 |
Services/Equipment
The following services/equipment are required to operate this kit:
– Water tap with adaptor
– Sink / drain
– Gas (if natural gas different Bunsen burner required)
Click here to view a labelled image of the assembled apparatus.
